TECHNICAL SPECIFICATIONS

Series

 

The T series represents a wide range of TwinSpin® high precision reduction gears with a cylinder shaped case. The T series high precision reduction gears comprise an accurate reduction mechanism and high-capacity radial and axial cylindrical roller bearings. This design of reduction gears allows the mounting of the load directly on the output flange or the case without the need of additional bearings. The T series high precision reduction gears are characterized by a modular design, which allows the mounting of desirable motor type to the reduction gear by means of a motor connection flange. The T series includes TwinSpin® high precision reduction gears that are not completely sealed; an inlet flange and a gasket kit have to be used for the sealing. Upon the customer’s request, SPINEA® is able to supply a completely sealed reduction gear with a flange according to the customer’s motor.

Advantages

  • zero backlash reduction gears
  • high moment capacity
  • excellent positioning accuracy and positioning repeatibility
  • high torsional and tilting stiffness
  • small dimensions and weight
  • high reduction ratios
  • long lifetime
  • easy assembly

 

TECHNICAL SPECIFICATIONS

T series features

Case


a) TB- threaded holes in case 1)
b) TC- threaded and through holes in case 2)
 

Input flange connection


Shaft sealing / adapter flange
is offered in the following versions:
a) motor connection flange
b) sealed input cover
c) without flange
 

Input shaft design


Input shaft is offered in the following versions:
a) shaft with key-way
b) according to special request
 

Installation and operation characteristics


A wider range of modular
configurations
 


1) valid for TS 60, TS 70, TS 80, TS 110, TS 140
2) valid for TS 170, TS 200, TS 240, TS 300

T series ordering specifications

Name

Size

Ratio Series
version
Shaft version
P (DIN 6885) S

TS

 

60

35, 47, 63 TB 6

70

41, 57, 75 TB 11

80

37, 63, 85 TB 8

110

33, 67, 89, 119 TB 14

140

33, 57, 87, 115, 139 TB 19

170

33, 59, 83, 105, 141 TC 24

200

63, 83, 125, 169 TC 28

240

37, 87, 121, 153 TC 28

300

63, 125, 191 TC 28

An example of an ordering code of a modified TwinSpin T series reduction gear with a motor flange: TS200 – 125 –TC– P24 – M235 – P231. The markings M235 and P231 for a specific modification are defined by the manufacturer.

T series rating tables

Size

Reduction ratio Rated output torque

Acceleration and braking torque

Permissible torque at
emergency stop
Rated input speed Cycle effective speed 5) Max. allowable input speed10) Tilting stiffness 1)6) Torsional stiffness 1)7) Max. no-load starting
torque 9)
Max. back driving
torque 9)
i TR [Nm] Tmax [Nm] Tem [Nm] nR [rpm] nef[rpm] nmax [rpm] Mt [Nm/arcmin] kt [Nm/arcmin] [Nm] [Nm]

TS 60

35 37 74 185 2000 3000 4000 27 3,5 0,16 9
47 5000 0,12 9
63 0,12 10

TS 70

41 50 100 250 2000 2000 4000 35 7 0,30 11
57 2500 5000 0,15 12
75 0,14 13

TS 80

37 78 156 390 2000 3000 4000 62 9 0,35 14
63 5000 0,20 15
85 0,12 16

TS 110

33 122 244 610 2000 2000 3500 150 22 0,35 24
67 2500 3900 0,35 28
89 2000 4500 0,30 30
119 2500 0,20 33

TS 140

33 268 670 1340 2000 2000 3000 340 54 0,60 40
57 2500 3200 0,40 40
87 4500 0,35 55
115 0,35 65
139 0,34 65

TS 170

33 495 1237 2475 2000 1500 3000 705 102 2,00 75
59 2000 3500 2,00 85
83 2500 1,40 100
105 4000 1,20 125
141 0,40 125

TS 200

63 890 2225 4450 2000 1500 3500 1070 178 1,90 90
83 2000 4000 1,80 120
125 4000 1,70 200
169 2200 4500 0,90 210

TS 240

37 1620 4050 8100 1500 1000 2000 1800 340 3,00 90
87 1500 3000 1,75 160
121 3500 1,70 170
153 3700 1,20 180

TS 300

63 2940 7350 14700 1500 1100 2500 3500 680 3,00 200
125 1400 3200 2,00 250
191 1500 3500 1,50 300


RIGHT TO CHANGE WITHOUT PRIOR NOTICE RESERVED

  1. Mean statistical value. For further information see chapter Torsional stiffness, Tilting stiffness.
  2. Load at output speed 15 rpm.
  3. Tilting moment Mc max value for Fa=0. If Fa ≠0, see chapter Tilting moment.
  4. Axial force Fa max value for Mc=0. If Mc≠0, see chapter Tilting moment.
  5. The effective speed can also be higher for lost motion bigger than 1 arcmin and for low values of oil viscosity. For lost motion lower than 0,6 arcmin please consult the effective speed with the manufacturer.
  6. The parameter depends on the version of the high precision reduction gear.
  7. The parameter depends on the version of the high precision reduction gear, ratio and lost motion.
  8. The values of the parameters are informative. The exact value depends on the specific version of the high precision reduction gear.
  9. Temperatures of the high precision reduction gear lower than 20°C will cause higher no-load starting or back driving torque.
  10. Depends on the duty cycle; a higher input speed may still be possible; please consult the manufacturer.

  The ratios highlighted in bold are recommended by SPINEA as optimal versions in terms of price and delivery.

T series rating tables

Size

Reduction ratio Max. lost motion

Average angular
transmission error 1)7)

Hysteresis Max. tilting moment 2)3) Rated radial force 2) Max. axial force 2)4) Input inertia 8) Weight 8)
i LM [arcmin] ATE [arcsec] H [arcmin] M c max [Nm] F rR [kN] F a max [kN] l [10-4 kgm2] m [kg]

TS 60

35 <1,5 ±36 <1,5 107 2,6 3,7 0,006 0,86
47
63

TS 70

41 <1,5 ±36 <1,5 142 2,8 4,1 0,061 1,05
57
75

TS 80

37 <1,5 ±36 <1,0 280 4,8 6,9 0,03 1,64
63
85

TS 110

33 <1,0 ±20 <1,0 740 9,3 13,1 0,16 3,76
67
89
119

TS 140

33 <1,0 ±20 <1,0 1160 11,5 17 0,67 6,45
57
87
115
139

TS 170

33 <1,0 ±20 <1,0 2430 19,2 27,9 1,15 11,07
59
83
105
141

TS 200

63 <1,0 ±18 <1,0 3300 21,1 31,7 2,6

17,23

83
125
169

TS 240

37 <1,0 ±18 <1,0 5720 30,8 47,3 3,9 31,15
87
121
153

TS 300

63 <1,0 ±18 <1,0 12000 45,3 68,1 11,2 55,73
125
191


Important notes:

  • Load values in the table are valid for the nominal life of L10 =6000 [Hrs].
  • High precision reduction gears are preferred for intermittent cycles (S3-S8); the output speed in applications is inverted-variable. The continuous mode cycle (S1) is needed to be consulted with the manufacturer.
  • Dimensional pictures of the T series reduction gears are listed in the catalogue without sealing.
  • Sealing options are described in chapter Assembly instructions.
  • Please consult the maximum speed in a duty cycle with the manufacturer.
  • The values in the table refer to the nominal operating temperature.

  The ratios highlighted in bold are recommended by SPINEA as optimal versions in terms of price and delivery.