TECHNICAL SPECIFICATIONS

Series

The T series represents a wide range of TwinSpin® high precision reduction gears with a cylinder shaped case. The T series high precision reduction gears comprise an accurate reduction mechanism and high-capacity radial and axial cylindrical roller bearings. This design of reduction gears allows the mounting of the load directly on the output flange or the case without the need of additional bearings. The T series high precision reduction gears are characterized by a modular design, which allows the mounting of desirable motor type to the reduction gear by means of a motor connection flange. The T series includes TwinSpin® high precision reduction gears that are not completely sealed; an inlet flange and a gasket kit have to be used for the sealing. Upon the customer’s request, SPINEA® is able to supply a completely sealed reduction gear with a flange according to the customer’s motor.

Advantages

zero backlash reduction gears
high moment capacity
excellent positioning accuracy and positioning repeatibility
high torsional and tilting stiffness
small dimensions and weight
high reduction ratios
long lifetime
easy assembly

TwinSpin configurator

Download catalogue here

TECHNICAL SPECIFICATIONS

T series features

Case	a) TB- threaded holes in case 1) b) TC- threaded and through holes in case 2)
Input flange connection	Shaft sealing / adapter flange is offered in the following versions: a) motor connection flange b) sealed input cover c) without flange
Input shaft design	Input shaft is offered in the following versions: a) shaft with key-way b) according to special request
Installation and operation characteristics	A wider range of modular configurations

1) valid for TS 60, TS 70, TS 80, TS 110, TS 140
2) valid for TS 170, TS 200, TS 240, TS 300

T series ordering specifications

Name	Size	Ratio	Series version	Shaft version
Name	Size	Ratio	Series version	P (DIN 6885)	S
TS	60	35, 47, 63	TB	6	•
	70	41, 57, 75	TB	11	•
	80	37, 63, 85	TB	8	•
	110	33, 67, 89, 119	TB	14	•
	140	33, 57, 87, 115, 139	TB	19	•
	170	33, 59, 83, 105, 141	TC	24	•
	200	63, 83, 125, 169	TC	28	•
	240	37, 87, 121, 153	TC	28	•
	300	63, 125, 191	TC	28	•

An example of an ordering code of a modified TwinSpin T series reduction gear with a motor flange: TS200 – 125 –TC– P24 – M235 – P231. The markings M235 and P231 for a specific modification are defined by the manufacturer.

Rating table I
Rating table II

T series rating tables

Size	Reduction ratio	Rated output torque	Acceleration and braking torque	Permissible torque at emergency stop	Rated input speed	Cycle effective speed 5)	Max. allowable input speed10)	Tilting stiffness 1)6)	Torsional stiffness 1)7)	Max. no-load starting torque 9)	Max. back driving torque 9)
	i	T_R [Nm]	T_max [Nm]	T_em [Nm]	n_R [rpm]	n_ef[rpm]	n_max [rpm]	M_t [Nm/arcmin]	k_t [Nm/arcmin]	[Nm]	[Nm]
TS 60	35	37	74	185	2000	3000	4000	27	3,5	0,16	9
	47						5000			0,12	9
	63									0,12	10
TS 70	41	50	100	250	2000	2000	4000	35	7	0,30	11
	57					2500	5000			0,15	12
	75									0,14	13
TS 80	37	78	156	390	2000	3000	4000	62	9	0,35	14
	63						5000			0,20	15
	85									0,12	16
TS 110	33	122	244	610	2000	2000	3500	150	22	0,35	24
	67					2500	3900			0,35	28
	89					2000	4500			0,30	30
	119					2500				0,20	33
TS 140	33	268	670	1340	2000	2000	3000	340	54	0,60	40
	57					2500	3200			0,40	40
	87						4500			0,35	55
	115									0,35	65
	139									0,34	65
TS 170	33	495	1237	2475	2000	1500	3000	705	102	2,00	75
	59					2000	3500			2,00	85
	83					2500				1,40	100
	105						4000			1,20	125
	141									0,40	125
TS 200	63	890	2225	4450	2000	1500	3500	1070	178	1,90	90
	83					2000	4000			1,80	120
	125						4000			1,70	200
	169					2200	4500			0,90	210
TS 240	37	1620	4050	8100	1500	1000	2000	1800	340	3,00	90
	87					1500	3000			1,75	160
	121						3500			1,70	170
	153						3700			1,20	180
TS 300	63	2940	7350	14700	1500	1100	2500	3500	680	3,00	200
	125					1400	3200			2,00	250
	191					1500	3500			1,50	300

RIGHT TO CHANGE WITHOUT PRIOR NOTICE RESERVED

Mean statistical value. For further information see chapter Torsional stiffness, Tilting stiffness.
Load at output speed 15 rpm.
Tilting moment Mc max value for Fa=0. If Fa ≠0, see chapter Tilting moment.
Axial force Fa max value for Mc=0. If Mc≠0, see chapter Tilting moment.
The effective speed can also be higher for lost motion bigger than 1 arcmin and for low values of oil viscosity. For lost motion lower than 0,6 arcmin please consult the effective speed with the manufacturer.
The parameter depends on the version of the high precision reduction gear.
The parameter depends on the version of the high precision reduction gear, ratio and lost motion.
The values of the parameters are informative. The exact value depends on the specific version of the high precision reduction gear.
Temperatures of the high precision reduction gear lower than 20°C will cause higher no-load starting or back driving torque.
Depends on the duty cycle; a higher input speed may still be possible; please consult the manufacturer.

The ratios highlighted in bold are recommended by SPINEA as optimal versions in terms of price and delivery.

T series rating tables

Size	Reduction ratio	Max. lost motion	Average angular transmission error 1)7)	Hysteresis	Max. tilting moment 2)3)	Rated radial force 2)	Max. axial force 2)4)	Input inertia 8)	Weight 8)
	i	LM [arcmin]	ATE [arcsec]	H [arcmin]	M _{c max} [Nm]	F_rR [kN]	F _{a max} [kN]	l [10^-4kgm²]	m [kg]
TS 60	35	<1,5	±36	<1,5	107	2,6	3,7	0,006	0,86
	47
	63
TS 70	41	<1,5	±36	<1,5	142	2,8	4,1	0,061	1,05
	57
	75
TS 80	37	<1,5	±36	<1,0	280	4,8	6,9	0,03	1,64
	63
	85
TS 110	33	<1,0	±20	<1,0	740	9,3	13,1	0,16	3,76
	67
	89
	119
TS 140	33	<1,0	±20	<1,0	1160	11,5	17	0,67	6,45
	57
	87
	115
	139
TS 170	33	<1,0	±20	<1,0	2430	19,2	27,9	1,15	11,07
	59
	83
	105
	141
TS 200	63	<1,0	±18	<1,0	3300	21,1	31,7	2,6	17,23
	83
	125
	169
TS 240	37	<1,0	±18	<1,0	5720	30,8	47,3	3,9	31,15
	87
	121
	153
TS 300	63	<1,0	±18	<1,0	12000	45,3	68,1	11,2	55,73
	125
	191

Important notes:

Load values in the table are valid for the nominal life of L10 =6000 [Hrs].
High precision reduction gears are preferred for intermittent cycles (S3-S8); the output speed in applications is inverted-variable. The continuous mode cycle (S1) is needed to be consulted with the manufacturer.
Dimensional pictures of the T series reduction gears are listed in the catalogue without sealing.
Sealing options are described in chapter Assembly instructions.
Please consult the maximum speed in a duty cycle with the manufacturer.
The values in the table refer to the nominal operating temperature.

The ratios highlighted in bold are recommended by SPINEA as optimal versions in terms of price and delivery.